Rubber & foam sealing strips · Export supplier · No minimum, from 10 mdora@onaseal.com ↗
OnasealSend your section ↗
Menu
ProductsProfile LibraryCustom SealsFactoryGuidesContactProductsDoor & window sealsAutomotive weatherstripsRefrigerated truck door sealsEdge trim & U-channelBrush & wool pile sealsDoor bottom sealsShower door sealsCustom extruded & moulded rubber partsFridge & freezer door gasketsFilament tapeGarage door sealsEPDM foam seal tapeSolar panel seals

SHOWER / APPLICATION

Shower door seal strips, sweeps & water dams

Shower door seal strips for frameless and sliding glass – magnetic pairs, H / F / U profiles and bottom sweeps sized to your glass thickness – plus bendable silicone water dams.

Send your section ↗
Shower door seal strips, sweeps & water dams – illustrative imageIllustrative image
From US$0.15/m · indicative FOBNo minimum · from 10 mSampling 7–10 days

PRODUCTS

Shower door seals we supply.

From US$0.15/m · indicative FOB.
Every item from 10 m, in your size and colour.

Indicative FOB price for standard profiles; final price depends on section, material and quantity. Product photos are representative; your seal is made to your confirmed section and colour.

THE SHORT ANSWER

Shower door seals are transparent PVC (or silicone) profiles that clip onto the edge of the glass to stop water escaping. Pick the profile by position: magnetic pairs where two doors meet, U or H seals on the vertical edge against a wall or fixed panel, and F or bottom sweeps along the floor. They are sized by glass thickness, commonly 6, 8 or 10 mm. Silicone water dams stick to the floor or countertop to hold water back. We supply them from 10 m.

PVC ↗Silicone ↗

Indicative FOB price for standard profiles; final price depends on section, material and quantity.

Materials
Clear PVC, silicone, magnetic strip inserts
Profiles
Magnetic pair, H, F, U, bottom sweep, water dam
Glass
Sized for 6, 8, 10 mm glass; others on request
Colours
Transparent, translucent, white, grey
Packing
Cut lengths, retail bags, cartons, private label

Which shower seal fits my glass?

Shower seals are made for one glass thickness – a seal for 8 mm glass will not grip 6 mm glass and will not fit over 10 mm. Measure the glass edge with a caliper before ordering.

Glass thicknessSupplyProfiles
6 mmStandardMagnetic, H, F, U, bottom sweep
8 mmStandardMagnetic, H, F, U, bottom sweep
10 mmStandardMagnetic, H, F, U, bottom sweep
12 mmStandardMagnetic, H, F, U, bottom sweep
Other thicknessesOn requestSend the glass thickness and the gap

Also tell us the angle where the doors meet (90°, 135° or 180°) and the gap to close.

FEATURED · KITCHEN & BATH

Self-adhesive caulk strip, 38 mm and 22 mm.

Waterproof corner seal for sinks, baths, toilets and worktops.
Peel, fold, press – no silicone gun.

Before and after: sink, worktop and bath edges
Before and after: sink, worktop and bath edges
Where it goes: toilet base, bath, basin, kitchen worktop
Where it goes: toilet base, bath, basin, kitchen worktop
Easy installation in four steps
Easy installation in four steps
38 mm wide22 mm wide

Two widths: 38 mm for bath and shower-tray edges, 22 mm for basins, worktops and wall corners. Clean and dry the corner, fold the strip along its centre line, peel the backing and press it in.

See the caulk strip ↗

SECTIONS / PROFILE LIBRARY

Not sure what you need?
Match your seal in 3 steps.

  1. 1Pick the closest shape
  2. 2Tell us the size & colour
  3. 3Get a quote – usually within 2 hours

Made-to-order sections

Made to your drawing

Line drawings are schematic, not to scale. Photos show typical stock items; your order is made to the confirmed section and colour.

Open the full profile library ↗   Can't see your section? Send a drawing or photo ↗

BUYER QUESTIONS

Shower seals:
common questions.

Have a section in mind?
Dora can help with your enquiry.

Ask Dora ↗ All buyer questions ↗
01How do I choose a shower seal?

Note where it goes (between two doors, against a wall, along the floor), the glass thickness and the gap. See our shower door seal types guide.

02Which glass thickness do you cover?

6, 8, 10 and 12 mm are standard; tell us your glass if it is different.

03What is a shower water dam?

A bendable silicone strip stuck to the floor to keep water inside a walk-in shower or on a countertop.

04Price and minimum order?

No minimum – from 10 m. Indicative FOB prices start from US$0.15 per metre.

GUIDES

Related guides

Answers buyers ask before ordering.

Shower Door Seal Types by Glass Thickness: Magnetic, H, F, UThe main shower door seal types explained – magnetic, H, F, U, bottom sweep and water dam – where each goes, and how to …Read ↗EPDM vs Silicone Seals: Which Material Do You Need?EPDM vs silicone sealing strips compared: temperature, weather resistance, tear strength, transparency, food contact and…Read ↗How to Measure a Rubber Seal Profile for a Custom QuoteMeasure a rubber seal profile correctly: what to photograph, which dimensions matter, how to measure sponge without squa…Read ↗How to Replace a Shower Door Sweep (Bottom Seal)Measure the glass thickness and door width, slide off the old shower door sweep, cut the new clear PVC sweep to length a…Read ↗Magnetic Shower Door Seals: 90°, 135°, 180°How magnetic shower door seals close the gap where two glass doors meet, which angle profile you need and how to measure…Read ↗

08 / LET'S FIND YOUR PROFILE

Start with
your section.

A drawing, a clear cross-section photo, a sample or your gap size. Send what you have.

D
Dora

Sales Manager · replies usually within 2 hours

dora@onaseal.com ↗WhatsApp +86 159 2054 4735 ↗

For a useful quotation

  • Drawing or clear cross-section photo
  • Key dimensions / gap size
  • Material or performance requirement
  • Estimated quantity
  • Packing / branding requirement
Drawing or photo (optional)

Your enquiry goes straight to Dora at dora@onaseal.com. We use your details only to reply. Privacy

Chat on WhatsApp