Shower seals are chosen by position: magnetic pairs where two glass doors close together, U or H seals on a vertical edge against a wall or fixed panel, F seals and bottom sweeps along the floor, and silicone water dams on the floor itself. Order them by glass thickness (6, 8 or 10 mm are standard) and the gap they must close.
Seal types and positions
| Type | Position | Material |
|---|---|---|
| Magnetic pair | Where two doors meet, or door to panel at 180°/90° | Clear PVC with magnet strip |
| U seal | Glass edge against a wall | Clear PVC |
| H seal | Between two glass panels in line | Clear PVC |
| F / bottom sweep | Bottom of the door | Clear PVC with soft fin |
| Water dam | On the floor / countertop | Bendable silicone, self-adhesive |
How to order
- Glass thickness
- Gap to close (mm)
- Angle where doors meet: 90°, 135° or 180°
- Length per piece and quantity
Care
Clean with mild soap; avoid solvent cleaners that cloud clear PVC. Replace seals when they yellow, harden or no longer touch the glass.
Which seal fits 6, 8, 10 or 12 mm glass?
| Glass thickness | Supply | Profiles |
|---|---|---|
| 6 mm | Standard | Magnetic, H, F, U, bottom sweep |
| 8 mm | Standard | Magnetic, H, F, U, bottom sweep |
| 10 mm | Standard | Magnetic, H, F, U, bottom sweep |
| 12 mm | Standard | Magnetic, H, F, U, bottom sweep |
| Other thicknesses | On request | Send glass thickness and gap |
A seal made for one glass thickness will not grip another – measure the glass edge with a caliper before ordering.
Need a seal for this?
Send your section, gap size or a photo of the old seal – Dora replies usually within 2 hours. Shower door seals are available from 10 m.